Building Trade Demo
Welcome
A supportive place to practise and build your skills.
0 of 251 activities finished · 0 of 27 units complete
1
2
3
Building Trades
Core units
CPCCCA2002
Use carpentry tools and equipment
- Sharpening Edge Tools: Grind, Sharpen and Hone a Plane Blade and ChiselStep through it
- Changing Blades, Cutters and Discs the Safe WayStep through it
- Electrical safety on site: extension leads, portable RCDs and lead managementWatch & explore
- Grinding and Honing: Getting the Bevel Angles RightWatch the board
- Why overheating destroys a blade's temper during grindingWatch it happen
- Study notes — Use carpentry tools and equipmentRead the notes
- Sharp Tools, Safe Hands: Getting Started with Carpentry ToolsListen in
- Get Ready Before You Pick Up a Tool: Plan-and-Prepare SequencePut it in order
- Knock-off Time: Cleaning Up the Deck JobYou decide
- Site inspection: spot the hazards before you startSpot the hazards
- Sort the Hand Tools: Match Each Tool to Its Primary FunctionSort it out
- Match the PPE to the TaskSort it out
- Pre-start tool check: spot the faultsSpot the hazards
- Choosing the right power tool for the jobQuiz yourself
CPCCCA2011
Handle carpentry materials
- Setting Out a Timber and Sheet-Material StackStep through it
- Building a Secure Pallet Load Ready for Mechanical HandlingStep through it
- Move It Once: Handling Materials Like a CarpenterListen in
- Study notes — Handle carpentry materialsRead the notes
- Plan Before You Lift: Sequence the Prep StepsPut it in order
- Match the PPE to the Handling TaskSort it out
- Laydown Area Walk-Through: Spot the HazardsSpot the hazards
- Right tool, right check: handling gear on siteSort it out
- Match the material to its key handling requirementSort it out
- Reading a Safety Data Sheet Before You Handle a ProductRead & find
- WHS, safety data sheets and quality rules for handling carpentry materialsQuiz yourself
CPCCCA3001
Carry out general demolition of minor building structures
- Top-Down Deconstruction: Demolishing a Small Timber-Framed Structure with Attached Deck and RoofStep through it
- Study notes — Carry out general demolition of minor building structuresRead the notes
- Think Before You Swing: Demolishing Minor Structures the Right WayListen in
- Sort the Load: Salvage, Recycle or Dispose?Sort it out
- Is It Dead? Confirming the Status of Services Before DemolitionYou decide
- Spot the hazards: residential demolition site walk-aroundSpot the hazards
- Toolbox Talk: Confirming the Demo Scope, Reporting a Faulty Tool and Raising a HazardTalk it out
- Reading a work order and SWMS: external wall demolition for a 3 m openingRead & find
- WHS and environmental rules for minor demolition — knowledge practiceQuiz yourself
CPCCCA3002
Carry out setting out
- Setting Out a Building: The Full Sequence, Step by StepStep through it
- Anatomy of a set-out profile (hurdle)Explore it
- Checking a building for square using equal diagonals within tolerancePlay with it
- Setting out accurately on a site with fall (sloping and steep ground)Watch & explore
- Line, level and plumb as the three setting-out referencesWatch & explore
- Lines, Levels and the 3-4-5: Getting Setting Out RightListen in
- Study notes — Carry out setting outRead the notes
- Square It Up: 3-4-5 Right Angles and Diagonal ChecksWork it out
- Setting-Out Devices: Sort by Job, Know the LimitsSort it out
- Spot the hazards: inspecting and isolating a block before setting outSpot the hazards
- Reading a Site Plan: Extracting Set-out DimensionsRead & find
- Before You Set Out: Compliance, Quality, Safety and Site IsolationQuiz yourself
CPCCCA3003
Install flooring systems
- Set Out, Square and Level: Bearers and Joists Done RightWatch the board
- How imposed loads travel through a floor systemWatch it happen
- Inside a timber sub-floor: from footing to floorboardsExplore it
- Damp proof course and termite barrier arrangementsWatch & explore
- From Stumps to Floorboards: Building Floors That LastListen in
- Study notes — Install flooring systemsRead the notes
- Flooring quantities: sheets, lineal metres and joistsWork it out
- Bearer-and-joist floor: get the install sequence rightPut it in order
- Spot the hazards: sub-floor and deck work siteSpot the hazards
- Springy, Out-of-Level Floor: Trace the Fault in the Sub-Floor FrameFind the fault
- Sort It: Framing, Supports and Flooring MaterialsSort it out
- NCC, Australian Standards and NASH compliance for flooring systemsQuiz yourself
CPCCCA3004
Construct and erect wall frames
- Setting Out Wall Plates and a Pattern Stud: Step-by-Step WalkthroughStep through it
- The Rules Behind the Frame: NCC, AS 1684 and the NASH StandardBe taught it
- Inside a Wall Frame: Timber and Steel AnatomyExplore it
- Study notes — Construct and erect wall framesRead the notes
- Walls That Stand Straight: Framing from Set-Out to Clean-UpListen in
- Wall Frame Material Take-Off: Studs, Plates, Noggings and LintelsWork it out
- Site inspection: spot the hazards before wall framing startsSpot the hazards
- Reading the Wall Framing Plan — Lot 14 Banksia CourtRead & find
- Stand It, Brace It, Plumb It: Erecting a Wall Frame in the Right OrderPut it in order
- Right material, right job: sorting framing timbers and steelSort it out
- Wall Frames Knowledge Check: Standards, Safety, Tools and TechniquesQuiz yourself
CPCCCA3005
Construct ceiling frames
- Setting out ceiling joist positions on the top plateStep through it
- Ceiling frame components — explore the frame, then label itExplore it
- Ceiling frame set-out by the numbers: joists, trimmers and hanging beamsWatch the board
- Study notes — Construct ceiling framesRead the notes
- Overhead and Under Control: Building Timber Ceiling FramesListen in
- Spot the hazards: ceiling frame worksite walk-throughSpot the hazards
- Ceiling Frame Quantity Drills: Joists, Trimmers and Span ChecksWork it out
- Sort the Timber: Ceiling Joists, Beams or Trim?Sort it out
- Get the Ceiling Frame Sequence RightPut it in order
- Compliance, waste and clean-up: ceiling framing knowledge checkQuiz yourself
CPCCCA3006
Erect roof trusses
- Erecting Roof Trusses: Step-by-Step Erection SequenceStep through it
- Inside a Trussed Roof: Timber and Steel Truss AnatomyExplore it
- Study notes — Erect roof trussesRead the notes
- Standing the Roof: Trusses from Plan to BraceListen in
- Spot the hazards: truss erection site walk-throughSpot the hazards
- Truss Erection Toolbox: Sort It or Tag It OutSort it out
- Truss Day: Lifting, Landing and StackingYou decide
- Take-off from the truss layout plan: trusses, brackets and fastenersWork it out
- Roof truss job: plan, erect, brace, clean up — get the order rightPut it in order
- Reading the Truss Layout Plan: Hip-and-Valley Roof with Gable EndRead & find
- Standards and Quality Check: Erecting Roof TrussesQuiz yourself
CPCCCA3007
Construct pitched roofs
- Setting Out the Pattern Rafter — Birdsmouth, Overhang and Creeper ReductionWatch the board
- Pitched Roof Anatomy: Hip-and-Valley Cutaway ExplorerExplore it
- From Top Plate to Ridge: Getting Pitched Roofs RightListen in
- Study notes — Construct pitched roofsRead the notes
- Rafter, hip and creeper length calculations — worked example and speed drillsWork it out
- Pitched Roof Erection: Get the Sequence RightPut it in order
CPCCCA3008
Construct eaves
- Building a Boxed Eave: Step-by-Step from Drawings to MouldingsStep through it
- Inside the Eave: Name Every Part of the AssemblyExplore it
- Setting Out Junction Cuts from the PitchWatch the board
- The Line You See from the Street: Building Eaves That Look RightListen in
- Study notes — Construct eavesRead the notes
- Sizing Eaves Materials: Soffit Sheets, Fascia, Quad and BattensWork it out
- Sort It: Eaves Materials and Their Matching ToolsSort it out
- Hazard hunt: inspect the eaves worksite before you startSpot the hazards
- Know Your Compliance Documents: NCC, AS 1684, NASH and Workplace Quality — Constructing EavesQuiz yourself
CPCCCA3010
Install windows and doors
- Positioning and levelling a window unit in the wall frame openingStep through it
- Hanging a Door: Hinge Set-Out and Gaps to AS 2688Watch the board
- Cavity Sliding Door: Fit, Hang and Adjust — Guided WalkthroughStep through it
- Study notes — Install windows and doorsRead the notes
- Plumb, Level and In Wind: Getting Windows and Doors Right First TimeListen in
- Sort It: Door Types, Door Furniture and Frame ComponentsSort it out
- Rapid Fixing: Match the Fastener to the SituationSort it out
- Reading a Window and Door Schedule Before InstallationRead & find
- Cutting Lists and Quantities: Window and Door InstallWork it out
- Constructing and Fixing a Rebated External Door Frame: Put the Steps in OrderPut it in order
- Site walk-through: spot the hazards before the installSpot the hazards
- Compliance and standards: installing windows and doorsQuiz yourself
CPCCCA3016
Construct, assemble and install timber external stairs
- Marking Out a Stringer: Step-by-Step Setout for Timber External StairsStep through it
- Anatomy of a timber external stair — explorable cutawayExplore it
- How rise, going and pitch interactPlay with it
- Getting External Timber Stairs Right — From Set-Out to HandrailListen in
- Study notes — Construct, assemble and install timber external stairsRead the notes
- Stair Assembly Drill: Get the Sequence RightPut it in order
- Spot the hazards: external stair worksiteSpot the hazards
- Rise and going: setting out a compliant external stair flightWork it out
CPCCCA3017
Install exterior cladding
- Installing Horizontal Weatherboards: From Set-Out Rod to Finished CornersStep through it
- Inside the Wall: Frame to Cladding CutawayExplore it
- Effective Cover and the Set-Out RodWatch the board
- The Building's Raincoat: Getting Exterior Cladding RightListen in
- Study notes — Install exterior claddingRead the notes
- Cladding quantities: effective cover, rows and order lengthWork it out
CPCCCA3024
Install lining, panelling and moulding
- Raking Moulds and Pelmet Mitres: Developing the PatternWatch the board
- Getting a Stud Wall True: Preparing the Frame Before Lining Goes OnStep through it
- Mitres, Scribes and the Scotia Return: Tight Joints Every TimeWatch the board
- Installing wall lining to plumb, level and a uniform planeStep through it
- The Work Everyone Sees: Lining, Panelling and MouldingListen in
- Study notes — Install lining, panelling and mouldingRead the notes
- Sort the Tools: Lining, Panelling and MouldingSort it out
- The Gapping Mitre: Trace the Fault Before You RecutFind the fault
- Hazard hunt: inspect the fit-out room before you line the wallSpot the hazards
- Reading the Job Documents: Riverbend Rise Fit-Out Work PackageRead & find
- End-of-Job Clean-Up: Get the Routine RightPut it in order
- Quantity take-off drills: lining boards, skirting and fixingsWork it out
- Lining, panelling and moulding: matching materials, fixings and profilesQuiz yourself
CPCCCA3025
Read and interpret plans, specifications and drawings for carpentry work
- The Documentation Set: Plans, Specs and Schedules for CarpentryBe taught it
- Residential Site Plan Explorer: Orient the Plan, Locate Every FeatureExplore it
- Before You Pick Up a Saw: Making Sense of Plans, Specs and DrawingsListen in
- Study notes — Read and interpret plans, specifications and drawings for carpentry workRead the notes
- From Drawing Set to Work Plan: Get the Planning Steps in OrderPut it in order
- Crack the Legend: Drawing Symbols and AbbreviationsSort it out
- Scale conversions: from paper to site and backWork it out
- Cross-Checking the Documents: Rear Extension Job CardRead & find
- Which Drawing Do You Trust? Verifying Currency Before Set-OutYou decide
- Reading the Spec: Materials, Standards, Tolerances and FinishesQuiz yourself
CPCCCA3028
Erect and dismantle formwork for footings and slabs on ground
- Erecting formwork for a slab on ground: the full sequenceStep through it
- Stripping Slab Formwork Safely and Preparing Components for ReuseStep through it
- Setting Out Slab Formwork: Line, Level, Plumb and SquareWatch the board
- Boxing Up: Formwork for Footings and Slabs Done RightListen in
- Study notes — Erect and dismantle formwork for footings and slabs on groundRead the notes
- Order It Right: Formwork and Concrete Quantities for a Slab on GroundWork it out
- Reading a Slab-on-Ground Formwork Setout DrawingRead & find
- Spot the hazards: site inspection before erecting slab formworkSpot the hazards
CPCCCM2006
Apply basic levelling procedures
- Two Peg Test: Checking Your Automatic Level Before You Trust ItStep through it
- Inside an Automatic Level: Explore the Parts, Then Place the LabelsExplore it
- Reducing levels: rise and fall, and height of collimationWatch the board
- Study notes — Apply basic levelling proceduresRead the notes
- Getting It Level: Shooting Heights You Can TrustListen in
- Reducing Levels and Transferring Heights — Calculation DrillWork it out
- Site Walk: Spot the Hazards Before You Shoot LevelsSpot the hazards
CPCCCM2008
Erect and dismantle restricted height scaffolding
- Establishing sound footings and base plates on varying ground conditionsPlay with it
- Study notes — Erect and dismantle restricted height scaffoldingRead the notes
- Small Scaffold, Same Rules: From Plan to Pull-DownListen in
- Read a SWMS and JSA for a Restricted Height Scaffold JobRead & find
- Scaffold Load Checks: Reading Duty Ratings and Load TablesWork it out
- Erection Sequence Drill: Modular Scaffold up to 4 mPut it in order
- Spot the defective scaffold components: reject, repair or tag outSpot the hazards
CPCCCM2012
Work safely at heights
- Three-Anchor Restraint Traverse: Stay Connected from Start to FinishStep through it
- Full-body harness, lanyard and connectors: explore, then labelExplore it
- Hierarchy of controls applied to working at heightsWatch & explore
- Study notes — Work safely at heightsRead the notes
- Two Metres Up: Planning, Clipping On and Getting Down SafelyListen in
- Sort the signs and barricades — pick the right controlSort it out
- Fall clearance calculations: will the system stop you before the ground does?Work it out
- Hazard scan: roof and scaffold site — timed spotting challengeSpot the hazards
- Pre-start fault find: the fall arrest kit that won't pack downFind the fault
- Read and review a SWMS for a work-at-heights roofing taskRead & find
- Change in the Wind: Responding to Changing Conditions at HeightYou decide
- Work safely at heights: laws, planning and equipment know-howQuiz yourself
CPCCCO2013
Carry out concreting to simple forms
- Working Out Concrete Volume: Paths, Slabs and OrderingWatch the board
- Pouring a concrete path: full job walkthrough from substrate to finishStep through it
- Water/cement ratio and mix proportions vs strength and workabilityPlay with it
- Inside the Mix: Concrete Ingredients, Strength and Keeping It StrongBe taught it
- Study notes — Carry out concreting to simple formsRead the notes
- From Formwork to Finish: Concreting the Simple Stuff RightListen in
- Concrete Volume and Ordering Drills: Simple FormsWork it out
- Read the Plan: Concrete Path Specification SheetRead & find
CPCCOM1012
Work effectively and sustainably in the construction industry
- Study notes — Work effectively and sustainably in the construction industryRead the notes
- Teamwork, Pathways and Keeping the Site GreenListen in
- Toolbox Huddle: Planning the Wall Frame Stand-UpTalk it out
- Completing a Site Environmental Observation ReportRead & find
- Sorting Out the Frame Crew BottleneckYou decide
- Site walk practice: spot the environmental hazardsSpot the hazards
- Reading a skills self-assessment: Apprentice CarpenterRead & find
CPCCOM1014
Conduct workplace communication
- Running Through a Toolbox Meeting, Step by StepStep through it
- Got It? Listening, Questioning and Confirming on SiteWatch the lesson
- Study notes — Conduct workplace communicationRead the notes
- Say It, Hear It, Write It Down: Communication That Works On SiteListen in
- Reading site documents: finding the right informationRead & find
- Pass It On: Taking an Instruction and Relaying It on SiteTalk it out
- Completing Site Records: Diary, Timesheet and Near-Miss ReportRead & find
- The 6:55 Toolbox Talk: When and How to Speak UpYou decide
CPCCOM1015
Carry out measurements and calculations
- Shapes on Site: Area and Volume FormulasWatch the board
- Right Tool, Right Measurement: Rulers, Tapes and Digital DevicesWatch the lesson
- Estimate, Calculate, Check, Record: Working Out Concrete for a SlabStep through it
- Measure Twice, Order Once: Getting Numbers Right on SiteListen in
- Study notes — Carry out measurements and calculationsRead the notes
- Mix Ratios and Percentages on SiteWork it out
- Volume to Weight: Slabs, Footings and CubesWork it out
- Perimeter, Circumference and Area: Site Shape DrillsWork it out
- Metres to Millimetres and Back: Fast Conversion DrillsWork it out
- Pick the Right Tool: Match the Site Task to the Measuring EquipmentSort it out
CPCCOM3001
Perform construction calculations to determine carpentry material requirements
- Reading and Scaling Dimensions from a Residential PlanStep through it
- Formulas on the Board: Area and Volume for Carpentry ShapesWatch the board
- Getting the Numbers Right: Measuring Up a Carpentry JobListen in
- Study notes — Perform construction calculations to determine carpentry material requirementsRead the notes
- Metres ↔ Millimetres: Fast Conversion DrillsWork it out
- Counting Studs, Plates, Noggings and Rafters: Framing Quantity DrillsWork it out
- Area drills: lining, building wrap, cladding and roofingWork it out
CPCCOM3006
Carry out levelling operations
- Setting up and testing your level: from tripod to two-peg testStep through it
- Booking and Reducing Levels: Rise and Fall vs Height of CollimationWatch the board
- Study notes — Carry out levelling operationsRead the notes
- Getting It Level: Datums, Field Books and the Two-Peg TestListen in
- Stadia Distance Drills: Staff Intercept × Multiplying FactorWork it out
- Rise and Fall: Reduce Levels and Prove Them with the Three-CheckWork it out
- Height of collimation: calculating reduced levels with a change stationWork it out
CPCCWHS2001
Apply WHS requirements, policies and procedures in the construction industry
- Asbestos on Site: Spot It, Don't Disturb It, Report ItWatch the lesson
- Hierarchy of controls for eliminating or minimising riskWatch & explore
- Study notes — Apply WHS requirements, policies and procedures in the construction industryRead the notes
- Safe From the First Day: WHS on a Construction SiteListen in
- Kit Up: Match the PPE to the TaskSort it out
- Know Your Signs: Sort Site Safety Signs by CategorySort it out
- Fire near the materials store: make the right callsYou decide
- Timed site walk: find every hazard before the countdown endsSpot the hazards
CPCWHS3001
Identify construction work hazards and select risk control strategies
- Walking through a JSA: Standing timber wall framesStep through it
- Determining level of risk (likelihood × consequence)Play with it
- Hierarchy of controlsWatch & explore
- Study notes — Identify construction work hazards and select risk control strategiesRead the notes
- Spot It, Rate It, Control It: Hazards, JSAs and SWMSListen in
- Hierarchy of Controls Sorting DrillSort it out
- Site scan: spot the hazards before work startsSpot the hazards
- JSA or SWMS? Sort the job tasksSort it out
We acknowledge the Traditional Custodians of the lands on which we live, work and learn. We pay our respects to Elders past and present, and extend that respect to all Aboriginal and Torres Strait Islander peoples.