PROPOSED RESIDENCE
Lot 14, 22 Banksia Court, Wodonga VIC 3690
Builder: Harker Constructions Pty Ltd

Drawing: WALL FRAMING PLAN
Sheet: A-03 | Rev: B | Date: 14/03/2026
Drawn: R. Nguyen | Checked: A. Kaur

Scale: 1:100 @ A3
Wind classification: N2
All dimensions in millimetres UNO

Site instruction: Before commencing wall set-out, extract the framing values from this plan and the schedules below. Read this extract together with the full drawing set. Do not scale off the drawing — use figured dimensions and verify on site.

|◂————————— 9 600 —————————▸|

↕ 6 400N ▲

D2 870×2040

W1 1810×1200 (sill 900)← 2 000 →

D1 920×2100←1 200→

W2 850×600 (sill 1500)LIVING / MEALSBED 1BATH / L’DRYB1B1B1B1B2B2B2

LEGEND
External load-bearing wall (Type EW1)
Internal non-load-bearing wall (Type IW1)
W# window opening D# door opening
B1 plywood sheet brace B2 metal tension brace

WALL TYPES
EW1 — 90 × 35 MGP10 studs @ 450 mm centres; 90 × 45 MGP10 top & bottom plates; 90 × 35 MGP10 noggings @ max 1 350 crs
IW1 — 70 × 35 MGP10 studs @ 600 mm centres; 70 × 35 MGP10 plates
Overall wall frame height: 2 440 mm

LINTEL SCHEDULE (load-bearing walls, wind class N2)
Mark	Opening width	Lintel	Applies to
L1	Up to 1 200	140 × 45 MGP12	W2, D1
L2	1 201 – 1 900	2/190 × 45 MGP12	W1
—	Internal non-load-bearing openings	No lintel — 70 × 35 trimmer only	D2

BRACING SCHEDULE
Mark	Type / details	Location
B1	Structural plywood sheet bracing, 4.5 mm F11 ply, minimum 900 mm wide panels, nailed to the AS 1684.2 nailing pattern (edges 50 crs, internal 150 crs)	All four external corners
B2	Metal tension (speed) brace 30 × 0.8 mm, fitted in opposing pairs at 30°–60° to horizontal, tensioned before lock-off	Mid-length of north and south walls; internal wall as shown

FRAMING NOTES

All timber wall frames to comply with AS 1684.2 Residential timber-framed construction and the NCC. Wind classification N2.
Openings over 900 mm wide in load-bearing walls: 2/90 × 35 MGP10 jamb studs each side.
Fix frames to slab and to each other in accordance with AS 1684.2; use galvanised fixings where exposed to weather.
Structural opening sizes shown are width × height. Door leaf sizes are smaller than structural openings — order joinery from the window/door manufacturer’s schedule.
All dimensions in millimetres unless noted otherwise. Verify all dimensions on site before set-out.